Skip to content Skip to sidebar Skip to footer
Home / how to draw a 3d shape from different angles

how to draw a 3d shape from different angles

Post a Comment

Download Commodity

Download Article

Shapes are some of the first things you probably learned to depict. With a petty practice, you can make those shapes appear 3-dimensional. In most cases, you'll but demand to draw a line that curves on your shape to create perspective. In one case you have the outline of a 3D shape, imagine where the light source is hitting information technology and shade the reverse side heavily.

  1. i

    Make a circle using a pen or pencil. Draw the circle so information technology'due south as wide as y'all'd like the sphere to exist. Press lightly so yous can easily become back and shade in the sphere. For a little help drawing a circle, trace something circular or utilize a compass.[1]

  2. 2

    Draw a curved line across a circle to create a iii-dimensional sphere. Yous tin brand the line curve upwards or down in the eye of the circle to suggest the viewer is looking at the sphere from below or above. Curve the line as far upward or down as yous want, keeping in mind that a shallow curve gives you lot a side-view perspective.[2]

    • If you'd like to bear witness even more 3-dimensional detail, describe a dotted or dashed line that curves beyond the circumvolve in the reverse management of your line. The dotted line implies that you're looking behind the sphere.

    Advertizing

  3. 3

    Apply heavy pressure to shade a sliver of the sphere's side and lesser. Determine where calorie-free hits your sphere and brainstorm shading along the opposite side of the sphere where the shadow would autumn. Then, apply a little less pressure level equally you shade in the curved center of the sphere. Use a light bear on to shade only a little where the low-cal would striking the sphere.[three]

    • For instance, if light hits the top right of the sphere, press firmly forth the bottom left portion of the sphere to make a shaded crescent.

    Advertisement

  1. 1

    Draw 2 overlapping squares that are the same size. Make a elementary foursquare that's any size yous like. Then, identify your pencil in the center of the foursquare and sketch another foursquare from this point so you lot have ii squares that overlap slightly.[4]

    • Information technology's important to make the squares the same size or they won't form a cube when you connect them.

  2. two

    Make straight lines that connect the corners of the squares. Depict a straight line from 1 corner of a foursquare to the matching corner of the other foursquare. Repeat this for each corner to create a cube.[five]

    • Brand the directly lines connecting each corner parallel to make the cube realistic.

    Tip: If you don't want all the lines to be visible, erase the 3 connecting lines that are in the middle of the square that's closest to you.

  3. 3

    Shade i side of the cube dark and use calorie-free pressure to shade the other sides. Since 1 side of the cube will be blocked from a light source, shade it in heavily so information technology's noticeably night. And so, utilise medium or low-cal pressure level to shade the top of the box and the other visible side of the cube.[6]

    • To make the cube fifty-fifty more than realistic, draw a square-shaped shadow coming from the dark side of the cube.

    Advertizement

  1. i

    Sketch a V shape using a pen or pencil. If you tin draw a triangle, you tin can easily brand a cone. Draw a V shape or sketch it upside down equally though you're starting to depict a triangle without its base of operations.[seven]

    • Make the 5 shape equally large as you'd similar the cone to be.

  2. 2

    Describe an oval at the base of operations of the V shape. Lightly sketch an oval shape that connects the ii widest points of the V shape. This seals off the shape to create a 3-dimensional cone.[8]

    Tip: If you're making an upside-down Five shape, you could shade in a shadow from the lesser of 1 side.

  3. 3

    Darken 1 side of the cone and gradually shade to the opposite side. Rub the tip of your pencil back and forth along 1 side of the cone until it'southward heavily shaded. Apply a piddling less pressure level as you shade towards the eye of the cone and use a lite touch on the opposite side.[9]

    • Add a trivial more shading along the lesser of the cone near the darker side of the cone.

    Advertisement

  1. 1

    Make an equilateral triangle. Take a pencil and draw a triangle that has equal sides. An equilateral triangle also has 3 equal angles since the sides are the same length. If it helps, trace an equilateral triangle or use a ruler so you get verbal measurements.[10]

  2. 2

    Sketch some other triangle coming from one side of your equilateral triangle. Place your pencil at the top of the equilateral triangle and brand a straight line that comes downwardly towards the side of the first triangle, but don't allow it reach as far as the bottom of the first pyramid. And so, draw a direct line connecting the bottom of this line with the corner of the first pyramid.[xi]

    • Make the peak angle of the side pyramid between 20 and 40 degrees so your pyramid doesn't expect unbalanced.

    Tip: If you'd like to show the view inside the pyramid, draw a square using a dashed line along the base of the triangle. Make some other dashed line from the back corner of the square to the top of the pyramid.

  3. three

    Shade in 1 side of the pyramid and leave the other side lighter. Decide where the light is striking your pyramid and shade the opposite side until information technology's night. For case, if the light is hitting the side of the pyramid, shade in the front so it looks like it'southward in shadow.[12]

    • If you'd similar to include a shadow, shade in a triangular shape coming from the lesser of the pyramid.

    Advertisement

  1. 1

    Draw a triangle to make the front of the prism. Y'all tin can make the triangle any size you like. Consider making it big until you become comfortable with drawing prisms. Then, yous can attempt making tiny triangular prisms.[xiii]

    • You tin can make any type of triangle you similar. Make an equilateral, isosceles, or a right triangle, for example.

  2. 2

    Create another triangle that's the aforementioned size equally the kickoff triangle. Identify this identical triangle where you lot want the prism to stop. This triangle makes the back face of the prism.[14]

    • Ensure that the triangles aren't touching or it will exist difficult to describe the remaining lines for the prism.

  3. three

    Draw straight lines to connect each of the front triangle points with the dorsum points. Place your pencil on the height of the front end triangle and draw a straight line to the top of the dorsum triangle. Echo this for the other two points of each triangle to create a prism.[15]

    Tip: If y'all'd like the triangular prism to appear opaque, erase the center lines of the prism.

  4. 4

    Shade in 1 side of the triangular prism. Think about how the calorie-free is hitting the prism and shade in the other side of the prism until it'southward dark. For case, if calorie-free is striking the side of the prism, make the front face up nighttime.[xvi]

    • If you lot'd like the light to striking the front end of the prism, heavily shade in the side.

    Advertisement

Add New Question

  • Question

    How can I draw a rectangular prism?

    Community Answer

    You can make a rectangular prism past turning the squares in the cube instructions into rectangles.

  • Question

    How practise I draw a pyramid?

    Community Answer

    Wait at the finished triangular prism. Recollect, a triangular prism is a pyramid, don't let the names fool y'all!

  • Question

    How do I draw a 3D pentagon?

    Community Answer

    If you want information technology to be like a rectangular prism, only a pentagon, I recommend drawing the 2 pentagons and then connecting the corners. The second pentagon will be slightly above and to the left of the commencement, but they will still overlap.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

  • You can brand a rectangular prism by connecting ii squares with straight parallel lines.

  • Use a ruler to brand perfectly straight lines for your three-dimensional shapes.

Thanks for submitting a tip for review!

Advertisement

Things Y'all'll Need

  • Sharp pencil
  • Paper or drawing pad
  • Colored pencils, optional

About This Article

Article Summary X

To depict a 3D shape, commencement past drawing a square in the eye of a piece of paper. And so, depict another square above information technology and to the right. The bottom left of the second square should intersect the top right of the first foursquare, creating a smaller square between the two. Next, connect the corners of the outset square to the corners of the 2nd foursquare with directly lines. Finally, erase the inside lines so that you're left with a solid cube. For tips on how to draw other 3D shapes, similar cylinders or pyramids, keep reading.

Did this summary help you lot?

Cheers to all authors for creating a page that has been read 167,534 times.

Did this article aid you?

montgomeryyoucity.blogspot.com

Source: https://www.wikihow.com/Draw-3D-Shapes

Post a Comment for "how to draw a 3d shape from different angles"